TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 105 of 534

TM 5-5420-202-20-4

PERSONNEL HEATER REPAIR (Sheet 3 of 8)

Heater Igniter Replacement (Sheet 3 of 4)

INSTALLATION:

1.

Install igniter (A) into tube.

2.

Using hand, press down on igniter (A),

and using screwdriver on pin (B), turn

igniter (A)

(c).

clockwise to secure in tube

5.

Place electrical inlet connection (H) in

position on personnel heater.

6.

Using screwdriver, turn two captive screws

(J) 1/4-turn clockwise to secure inlet con-

nection (H) to personnel heater.

7.

8.

Connect shorter lead (D) to ground

terminal (E).

Connect longer white lead (F) to

igniter control (G).

Mount cover (K) on personnel heater.

NOTE

Some

covers have ony one screw on

top.

Using screwdriver, install two screws

to secure cover (K).

9.

10.

11.

12.

heater electrical connector (H).

Screw coupling (N) over connection (H).

Connect battery ground cables (10-268).

Connect electrical connector (M) to perso

Check heater operation (TM 5-5420-202-10).

(L)

Go on to Sheet 4

TA248608

18-9