TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 99 of 534

TM 5-5420-202-20-4

PERSONNEL HEATER ASSEMBLY REPLACEMENT (Sheet 2 of 5)

REMOVAL:

1.

Locate electrical connection (A) at

cover on personnel heater.

2.

Disconnect cable (B).

4.

Using

7/16

inch wrench, loosen coupling

clamp (E) securing exhaust pipe (F).

5.

Remove clamp (E).

6.

Separate pipe (F) from heater.

7.

Push and pull quick-disconnect coupler

(C) to disconnect hose (D). Position drain

pan to catch fuel from hose, if necessary.

NOTE

It may be necessary to move heater left or right

to remove remaining two screws and lock-

Washers.

Using cross-tip screwdriver, remove four

screws and lockwashers (G) securing heater

to duct.

Go on to Sheet 3

TA248602

18-3