TM 5-5420-202-20-4
SEAT AND BACKREST MOUNT ASSEMBLY REPAIR (Sheet 3 of 7)
15.
16.
17.
Using snap ring pliers, remove four
snap rings (T).
Remove four rollers (U).
Using 1/4 inch punch and hammer, drive
out four nuts (V).
Go on to Sheet 4
11.
Using pliers, remove cotter pin (N).
12.
Remove washers (P) and headed pin
(Q).
13.
Remove spool (R).
14.
Remove two springs (S) from spool (R)
●
TA246596
17-65