TM-5-5420-202-20-4

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 4 OF 4

OCTOBER 1985

TM-5-5420-202-20-4 - Page 102 of 534

TM 5-5420-202-20-4

PERSONNEL HEATER ASSEMBLY REPLACEMENT (Sheet 5

of

5)

9.

Position coupling (Q) and coupling clamp (R) on heater (D).

10.

Close coupling clamp (R) and, using 7/16 inch

to heater (D).

11.

Using torque wrench with extension, tighten

12.

13.

14.

wrench, tighten nut to secure exhaust pipe

clamp (R) nut to 60 lb-ft (81 N-m).

Using flat-tip screwdriver, tighten two clamps (L) securing heater (D) in bracket (K).

Make sure all personnel heater connections,

especially exhaust pipe, are tight and

secure.

Push quick-disconnect coupling (S) into

fuel hose line (T) to connect line to

heater.

15.

Connect harness cable connector (U) to

heater connector (V).

End of Task

All data on pages

18-7 thru 18-14 deleted.

18-6 Change 4