TM 5-5420-202-20-4
PERSONNEL HEATER AIR DUCT OUTLET HOSE AND DEFLECTOR
(Sheet 2 of 3)
6.
7.
8.
9.
Holding nuts (P) with 9/16 inch wrench,
use 9/16 inch socket to remove four
screws (Q), lockwashers (R) and nuts (P)
securing two clamps (S) to hull brackets.
Remove two clamps (S).
Gently pull hose (N)
(T).
Remove hose clamp
free of heater elbow
(A) from hose (N).
INSTALLATION
:
1.
2.
3.
4.
Place clamp (A) loosely over hose (B).
Install hose (B) loosely on heater elbow
(c).
Place clamps (D) over hose (B) and
position on hull bracket (E).
Using 9/16 inch socket, install four screws
(F), lockwashers (G), and nuts (H) securing
clamps (D) to hull bracket (E).
REPLACEMENT
G
O
on to Sheet 3
18-18
TA248617