TM-5-5420-203-14

BRIDGE, ARMORED VEHICLE LAUNCHED, SCISSORING TYPE CLASS 60 & CLASS 70 ALUMINUM, 60 FOOT SPAN; FOR M48A5 AND M60 LAUNCHER

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE

JUNE 1991

TM-5-5420-203-14 - Page 184 of 298

TM 5-5420-203-14

RAMP CURB REPLACEMENT

TOOLS/EQUIPMENT

General Mechanics Tool Box SC 5180-90-N26

SUPPLIES:

Lock Washer (item 5, Appendix E) (6 required)

EQUIPMENT CONDITIONS:

None.

PERSONNEL:

Two

REMOVAL

REMOVE RAMP CURB (4).

a. Remove four nuts (1) and four bolts

(2). from ramp curb (3). Remove four lock

washers (4) from bolts (2). Discard lock

washers (4).

b. Remove bolt (5) with attached lock washer

(4) from curb (3). Remove ramp curb (3).

Discard lock washer (4).

INSTALLATION

INSTALL RAMP CURB (4).

a.

b.

c.

d.

e.

Place ramp curb (3) on end ramp (6). Aline

holes in ramp curb with those in end ramp.

Thread bolt (5) with attached flat washer into

threaded socket in end of curb (3) and end ramp

(6) and tighten.

Insert four bolts (2) from the bottom side of end

ramp (6)

Up

through end ramp and ramp curb (3).

Install four new lock washers (4) on installed

four bolts (2).

Thread four nuts (1) on four bolts (2) and

tighten.

END OF TASK

3-18