TM-5-5420-203-14

BRIDGE, ARMORED VEHICLE LAUNCHED, SCISSORING TYPE CLASS 60 & CLASS 70 ALUMINUM, 60 FOOT SPAN; FOR M48A5 AND M60 LAUNCHER

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE

JUNE 1991

TM-5-5420-203-14 - Page 201 of 298

NEAR-SHORE RAMP

TOOLS/EQUIPMENT:

SUPPLIES:

TM 5-5420-203-14

SECTION TRANSVERSE BRACE REPLACEMENT

General Mechanics Tool Box SC 5180-90-N26

Lifting Device (2000 lbs capacity)

Sling, Multiple Leg

None.

EQUIPMENT CONDITIONS:

Scissoring Cables and attaching hardware removed (pg 3-20).

Hydraulic Cylinder removed (pg 3-23).

Cylinder Beam removed (pg 3-31).

PERSONNEL:

Two

REMOVAL

REMOVE NEAR-SHORE RAMP SECTION TRANSVERSE BRACES (2 and 4).

a.

b.

WARNING

The hydraulic cylinder is heavy and can crush you. Stay clear of the cylinder when

it is suspended. Only personnel necessary to the task should be in,

on, or around

the task area.

Remove four bolts (1) from transverse brace

(2). Remove transverse brace (6).

Remove four bolts (3) securing transverse

brace (4) to sections (5 and 6). Remove

transverse brace (4).

INSTALLATION

INSTALL NEAR-SHORE RAMP SECTION

TRANSVERSE BRACES (2 and 4).

a.

b.

c.

d.

Install transverse brace (2) in position on

sections (5 and 6).

Install four bolts (1) securing transverse

brace (2). Tighten four bolts (l).

Install transverse brace (4) in position

on sections (5 and 6).

Install four bolts (3) securing transverse

brace (4). Tighten four bolts (3).

END OF TASK

3-35