TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 187 of 750

TM 5-5420-228-24

Section 1. MECHANICAL AND MISCELLANEOUS PROCEDURES

RESERVOIR QUADRANT BLOWER ASSEMBLY REPLACEMENT (Sheet 1 of 5)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

3-2

Installation

3-4

TOOLS:

3/16 in. socket head screw key (allen wrench)

5/16 in. socket head screw key (allen wrench)

3/8 in. socket head screw key (allen wrench)

7/16 in. combination box and open end wrench

3/4 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

Flat-tip screwdriver

Cross-tip screwdriver

Putty knife

3/8 in. combination wrench

1-1/8 in. open end wrench

Hammer

SUPPLIES:

Gasket

Lockwashers (10 required)

PERSONNEL:

Two

REFERENCE:

TM 5-5420-202-10

PRELIMINARY PROCEDURE:

Remove antenna base armor (page 3-260)

REMOVAL:

1.

Using 3/8 inch screw key, remove

four screws (A) from cover (B).

2.

Manually remove cover (B).

Go

on to Sheet

2

3-2