TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 188 of 750

TM 5-5420-228-24

RESERVOIR QUADRANT BLOWER ASSEMBLY REPLACEMENT (Sheet 2 0f 5)

3.

Using 1-1/8 inch wrench inside vehicle,

disconnect electrical lead (C) from blower

assembly (D).

4.

5.

Using 3/4 inch socket, remove four screws

(E) and lockwashers (F).

Using second technician, lift blower assembly

(G)

shock mount (H) and ring (J) from

vehicle.

6.

Using 3/8 inch wrench, remove clamp (K)

from motor silencer (L).

7.

Using one person to support ring (J), use

5/16 inch screw key to remove six screws

(M) and lockwashers (N).

8.

Remove ring (J) from blower assembly (G).

9.

Using flat-tip screwdriver, bend tabs (P) of

silencer (L) away from blower assembly (G).

10.

Remove silencer (L) and ring (J) from

blower assembly (G).

11.

Using putty knife, remove gasket (Q) from

bottom of ring (J) or quadrant (R).

Go on to Sheet 3

3-3