TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

  TM-5-5420-228-24 - Page 189 of 750

TM 5-5420-228-24
RESERVOIR QUADRANT BLOWER ASSEMBLY
12.
13.
14.
15.
Using 7/1 6 inch wrench to hold four nuts
use 3/16 inch screw key to remove four
screws (T) and five lockwashers (U).
Remove blower assembly (G) from shock
mount (H).
Using cross- tip screwdriver, remove
screw (V) and two lockwashers (W).
Remove ground strap (X).
INSTALLATION:
REPLACEMENT
(s),
(Sheet 3 of 5)
1.
Place shock mount (A) and ground strap (B)
in position on blower assembly (C).
2.
Manually install four screws (D), five
lockwashers (E), and four nuts (F).
3.
Using 7/16 inch wrench to hold four nuts (F),
use 3/16 inch screw key to tighten four
screws (D) to secure blower assembly (C) and
ground strap (B) to shock mount (A).
Go on to Sheet 4
3-4


Back to Top