TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 194 of 750

TM 5-5420-228-24

CUPOLA COVER REPLACEMENT (Sheet 2 of 2)

INSTALLATION:

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

Manually install bushing (A) on mount (B).

Using hammer as needed, install swing

assembly (C) until firmly positioned

and seated on vehicle in bushing (A).

From inside vehicle, use key to install

screw (D) into swing assembly (C).

With second technician, position cover (E)

on vehicle in closed position.

Using hammer, tap in hinge pin (F).

Using

Lock cover (E) in open position.

Place two springs (H) in position

Using pry bar and hammer guide

(J) of springs (H) into cover eye

Install

pliers, install two retaining rings (G).

on swing assembly (C).

forward eye

(K).

periscope mount lid (page 3-29).

NOTE

Do step 11 only when installing

cupola cover on late model cupola.

LATE MODEL CUPOLA

Install cupola cover handles (page 3-22).

COVER

End of Task

TA251410

3-9