TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 199 of 750

TM 5-5420-228-24

CUPOLA BODY ASSEMBLY REPLACEMENT (EARLY MODEL CUPOLA) (Sheet 2 of 3)

4.

With help from second technician,

direct crane operator to lift

cupola body (D) from quadrant (E).

5.

Lower cupola body assembly on to

wooden blocking material.

6.

Using putty knife scrape sealant

from exposed surface of quadrant

(E).

WARNING

Cleaning agent specified is flammable.

Use only in well ventilated areas. Keep

away from flames, sparks, or heat. Do

not smoke while using. Prevent contact

with eyes, mouth, and/or skin. Wear

rubber gloves when performing

cleaning procedures.

7.

Clean all exposed surfaces with

dry cleaning solvent and wipe dry

with cotton rags.

INSTALLATION:

1.

Attach cupola lifting sling to

loops (A).

2.

With help from second technician,

direct crane operator to lift

cupola body so that mating surface

can be inspected.

NOTE

If dirty clean mating surface with

dry cleaning solvent and wipe dry

with cotton rags.

Go on to Sheet 3

3-14