TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 206 of 750

TM 5-5420-228-24

CUPOLA COVER HANDLES REPLACEMENT (LATE MODEL CUPOLA) (Sheet 1 of 2)

TOOLS:

7/16 in. combination wrench

15/16 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

Hammer

SUPPLIES:

Shims (as required)

Lockwasher

PERSONNEL:

REMOVAL:

1.

Open cupola

NOTE

If replacing only outside handle,

go to step 4.

2.

Using wrench, remove two screws (B).

3.

Remove hook (C) and shims (D), if any, from inside handle (E). Retain shims (D) for

installation.

4.

Using 15/16 inch socket, remove nut (F) and lockwasher (G).

5.

Manually pull off inside handle (E).

6.

Manually remove woodruff key (H) and retain for installation.

7.

Using hammer,

Go on to Sheet 2

tap out outside handle (J).

TA251422

3-21