TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 208 of 750

TM 5-5420-228-24

CUPOLA COVER SAFETY LATCH REPLACEMENT (Sheet 1 of 2)

TOOLS:

3/4 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

3/4 in. combination wrench

1/8 in. drive pin punch

Hammer

Long round nose pliers

SUPPLIES:

Cotter pin

Lockwasher

Spring pin

PERSONNEL:

REFERENCE:

PRELIMINARY

One

TM 5-5420-202-10

PROCEDURE:

Close cupola cover (TM 5-5420-202-10)

REMOVAL:

1.

2.

3.

4.

5.

6.

7.

Holding

scr

ew (A) with wrench, use

socket-to remove nut (B) and lock-

washer (C).

Remove screw (A).

Using hammer and punch, drive out

spring pin (D).

Manually remove knob (E) and spring (F).

Remove rod (G) with latch (H) from

mounting bracket (J).

Using pliers, remove cotter pin (K).

Using pliers if necessary, remove

headed pin (L).

3-23

Go on to Sheet 2