TM 5-5420-228-24
PERISCOPE MOUNT LID LATCH REPAIR (Sheet 2 of 2)
CLEANING AND INSPECTION:
1.
Visually inspect all parts for damage or
be replaced.
2.
Visually inspect all parts for corrosion.
wear. All damaged or worn parts must
All corroded parts which cannot be cleaned
with crocus cloth or steel wool must be replaced.
ASSEMBLY:
1.
2.
3.
4.
5.
6.
7.
Place spring (A) on seat provided in latch
Put screws (C) and lockwashers
(D) in latch (B).
Position shim (E) on screws [C).
Place latch (B) in position on mount (F).
Manually start screws (C).
Using 7/16 inch socket and extension,
tighten screws (C).
Open driver’s or commander’s hatch
(TM5-5420-202-10).
End of Task
(B).
TA251433
3-32