TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 225 of 750

TM 5-5420-228-24

LEFT CUPOLA QUADRANT REPLACEMENT (Sheet 2 of 2)

INSTALLATION:

1.

2.

3.

4.

5.

6.

7.

8.

9.

NOTE

Sealant will be tacky when

applied, but will harden to

form a hard rubber like seal.

Using brush, apply sealant to mating surfaces

of vehicle and quadrant (A).

Attach lifting device to handle (B).

Have technician operating lifting device slowly

lift quadrant (A) into position over vehicle.

While two technicians guide quadrant (A) have person operating lifting device slowly

lower quadrant (A) into position on vehicle.

Remove lifting device from handle (B).

Using 3/4 inch socket, install seven screws (C).

Using 1-5/1 6 inch socket, install six screws (D).

Install cupola body (page 3-14 and 3-20)

Install cupola cover (page 3-9).

End of Task

TA251441

3-40