TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 227 of 750

TM 5-5420-228-24

RIGHT CUPOLA QUADRANT REPLACEMENT (Sheet 2 of 4)

6,

Place conduit (H) and wires (A) on

reservoir quadrant where it

will not interfere with right

quadrant removal.

7.

Using putty knife, remove gasket (J).

8.

Using 3/4 inch socket,

remove seven screws (K)

and lockwashers (L).

9.

Using 1-5/16 inch socket, remove six screws (M) and lockwashers (N).

10.

Attach sling to handle (P) and use lifting device to remove right cupola quadrant (Q)

from vehicle.

11. Using putty knife, remove old sealant from mating surfaces of vehicle and quadrant

(Q).

Go

on to Sheet

3

3-42

TA251443