TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 228 of 750

TM 5-5420-228-24

RIGHT CUPOLA QUADRANT REPLACEMENT (Sheet 3 of 4)

INSTALLATION:

1.

2.

3.

4.

5.

6.

7.

8.

9.

Using brush, apply sealant to

mating surfaces of vehicle and

quadrant (A).

WARNING

Keep personnel clear and out from under

lifting

device

-

during lifting operation. Failure

could result in personnel being struck and

injured.

Attach sling to handle (B).

Have technician operating lifting

device

slowly lift quadrant (B) into

position over vehicle.

While two technicians guide quadrant (A),

have person operating lifting device

slowly lower quadrant (A) into position

on vehicle.

Remove sling from handle (B).

to do so

seriously

Using

3/4

inch socket, install seven screws (C) and lockwashers (D).

Using 1-5/16 inch socket, install six screws (E) and lockwashers (F).

Position wires (G) and conduit (H) onto quadrant (A).

Place four screws (J) in position through conduit (H).

G

O

on to Sheet 4

TA251444

3-43