TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 235 of 750

TM 5-5420-228-24

BRIDGE SEAT ASSEMBLY REPLACEMENT

5.

6.

7.

8.

9.

Carefully pull hold-down cylinder (H)

toward front of vehicle until cylinder

plug clears bridge seat (E).

Care fully lay hold-down cylinder (H) with

attached parts on top deck.

Position sling on bridge seat (E) and

attach lifting device.

Using 1-1/2 inch socket, remove remaining

six screws (J) and lockwashers (K) securing

bridge seat (E) to vehicle.

Using lifting device and two technicians,

guide bridge seat (E) away from

vehicle and lower to resting place.

(Sheet 2 of 4)

10. Using 9/16 inch socket, remove 20 nuts

(L), lockwashers (M), and screws (N)

securing two belts (P) to bridge seat

(E).

11. Remove two belts (P).

Go on to Sheet 3

3-50

TA251450