TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 213 of 750

TM 5-5420-228-24

PERISCOPE MOUNT LID REPLACEMENT (Sheet 1 of 3)

TOOLS:

Flat-tip screwdriver

Putty knife

SUPPLIES:

Pencil (Item 22, Appendix D)

Paper (Item 23, Appendix D)

Adhesive (Item 1, Appendix D)

Crocus cloth (Item 5, Appendix D)

Steel wool (Item 16, Appendix D)

Dry cleaning solvent (Item 15, Appendix D)

Lockwashers (2

required)

Seal, lid

Goggles (Item 26, Appendix D)

Gloves (Item 27, Appendix D)

PRELIMINARY PROCEDURE:

Remove periscope

mount (page 3-25)

REMOVAL:

1.

2.

3.

4.

5.

Position mount (A) bottom side up.

Remove seal (B).

Using screwdriver, remove two screws (C)

and lockwashers (D) from mount (A).

Press latch (E) to free lid (F).

Position mount (A) top side up.

NOTE

Record quantity and location of shims during removal for

correct lid alinement during installation.

6.

Remove lid (F), two hinges (G), and shims

(H) from mount (A).

7.

Separate two hinges (G) from lid (F).

8.

Using putty knife, remove lid seal (J) from

Go on to Sheet 2

3-28

mount (A). Throw lid seal (J) away.

TA251429