TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 209 of 750

TM 5-5420-228-24

CUPOLA COVER SAFETY LATCH

INSTALLATION:

REPLACEMENT

1.

2.

3.

4.

Position latch (A) in rod (B) with

holes alined.

Manually insert headed pin (C) through

holes with head in direction shown.

Using pliers, install cotter pin (D).

Place rod (B) with latch (A) in position

on mounting bracket (E).

5.

6.

7.

8.

9.

10.

11.

(sheet 2 of 2)

Manually install screw (F), new lockwasher (G),

and nut (H).

Holding screw (F) with wrench, use

socket to tighten nut (H) so that

latch (A) can move freely.

Place spring (J) on end of rod (B).

Place knob (K) in position on rod (B).

Using punch, aline holes in knob (K) and rod (B).

Using hammer and punch, install spring pin (L).

Do operational check (TM 5-5420-202-10).

End of Task

3-24