TM-5-5420-228-24
LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL
AUGUST 1985
TM-5-5420-228-24 - Page 306 of 750
SCISSORS CYLINDER RELIEF VALVE (RV8) AND FLOW REGULATOR (PCV3) REPLACEMENT
(Sheet 4 of 4)
13.
14.
15.
16.
17.
18.
19.
20.
Holding adapter (P) with 1-1/8 inch wrench,
use 1-1/4 inch wrench to install hose
assembly “CG” (Q) to adapter (P).
Holding elbow (K) with 12 inch adjustable
wrench, use 1-1/4 inch wrench to install
hose assembly “CF2” (R) to elbow (K).
Holding adapter (M) with 1-1/8 inch wrench,
use 1-1/4 inch wrench to install hose
assembly “CJ“ (S) to adapter (M).
Service hydraulic reservoir (LO 5-5420-202-12).
TM 5-5420-228-24
Bleed hydraulic system (page 3-72).
Check for hydraulic leaks and correct as necessary.
Service hydraulic reservoir (LO 5-5420-202-12).
Adjust relief valve pressure (page 3-89).
End of Task
TA251507
3-109
Back to Top
