TM-5-5420-228-24
LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL
AUGUST 1985
TM-5-5420-228-24 - Page 310 of 750
TM 5-5420-228-24
OVERHEAD CYLINDER RELIEF VALVE (RV9) AND FLOW REGULATOR (PCV1)
REPLACEMENT (Sheet 4 of 4)
9.
10.
11.
12.
Holding adapter (K) with 1-1/8 inch open end wrench, use 1-1/4 inch wrench to install
hose assembly “CO” (L).
Holding elbow (M) with 12 inch adjustable
wrench, use 1-1/4 inch wrench to install
hose assembly “CL” (N).
Holding elbow (P) with 12 inch adjustable
wrench, use 1-1/4 inch wrench to install
hose assembly “CN” (Q).
Holding adapter (R) with 1-1/8 inch
wrench, use 1-1/4 inch wrench to install
hose assembly “CM” (S).
13.
Bleed hydraulic system (page 3-72).
14.
Check for hydraulic leaks and correct as necessary.
15.
Service hydraulic reservoir (LO 5-5420-202-12).
16.
Adjust relief valve pressure (page 3-82).
17.
Install overhead cylinder armor (page 3-224).
End of Task
TA251511
3-113
Back to Top
