TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 308 of 750

TM 5-5420-228-24

OVERHEAD CYLINDER RELIEF VALVE (RV9) AND FLOW REGULATOR (PCV1)

REPLACEMENT (Sheet 2 of 4)

2.

Holding elbow (C) with 12 inch adjustable

wrench, use 1-1/4 inch wrench to remove

hose assembly “CN” (D).

3.

Holding elbow (E) with 12 inch adjustable

4.

wrench, use 1-1/4 inch open end wrench

to remove hose assembly “CL” (F).

Holding adapter (G) with 1-1/8 inch wrench,

use 1-1/4 inch wrench to remove hose

assembly “CO” (H).

5.

6.

7.

Holding regulator (M) with 15 inch adjustable

wrench, use 1-3/8 inch wrench to remove

bushing (N) and attached fittings.

8.

Holding bushing (P) with 1-3/8 inch wrench,

use 15 inch adjustable wrench to remove

regulator (M).

Using adjustable wrench, remove

elbow (J) and attached parts from

cap end of cylinder (K).

Using care to prevent damage, clamp

relief valve (L) in vise.

9.

Using 1-1/8 inch wrench, remove nipple (Q) and attached bushing (P).

10.

Using 1-1/8 inch wrench, remove nipple (R) and attached elbow (J).

11.

Using 12 inch adjustable wrench, remove

elbow (S) and attached fittings.

12.

Remove relief valve (L) from vise.

Go on to Sheet 3

TA251509

3-111