TM 5-5420-228-24
TONGUE ASSEMBLY REPLACEMENT (Sheet 2 of 4)
4.
Hook lifting device and sling through
four holes (F).
5.
Using snap ring pliers, remove four retaining
rings (G).
6.
Using socket, remove four grease fittings
(H).
7.
Using hammer and drive pin, tap out
two shafts (J).
8.
While two technicians guide tongue assembly (K), have third technician operate lifting
device to slowly pull tongue assembly (K) away from vehicle.
9.
Remove lifting device and sling.
Go on to Sheet 3
TA251669
4-17