TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

  TM-5-5420-228-24 - Page 614 of 750

TM 5-5420-228-24
PUMP-CLUTCH DRIVE REPLACEMENT (Sheet 3 of 4)
Inspect all parts for damage or wear.
Replace all unserviceable parts.
INSTALLATION
1.
2.
3.
4.
5.
6.
7.
8.
9.
Using arbor press, install
bearing (A) in housing (B).
Using snap ring pliers,
install retaining ring (C).
Using arbor press, install
bearing (D) on shaft (E).
Using arbor press, install bearing (D) and shaft (E) in housing (B).
Using snap ring pliers, install retaining ring (F).
Take pump-clutch drive (G) to vehicle.
Slide pump-clutch drive (G)
through opening in end of
support (H).
Put key (J) in groove of
shaft (E).
Aline key (J) with keyway in clutch (K), then slide pump-clutch drive (G)
into clutch (K).
Go on to Sheet 4
TA251676
4-25


Back to Top