TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

  TM-5-5420-228-24 - Page 620 of 750

TM 5-5420-228-24
HYDRAULIC PUMP REPLACEMENT (Sheet 3 of 3)
6.
Using socket, install eight screws (G) and
lockwashers (H).
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Using 7/8 inch wrench, install hose assembly
“CV5” (J) on elbow (K).
Holding elbow (L) with adjustable wrench,
use 1-1/2 inch wrench to install hose
assembly “BA” (M).
Using 15 inch adjustable wrench, install hose
assembly “CZ” (N) on fitting (P).
Manually install quick disconnect of hose
assembly “CW” (Q).
Place box (R) in position.
Using 7/16 inch wrench, install two screws
(s).
Install clutch assembly (page 4-41).
Service hydraulic reservoir (LO 5-5420-202-12).
Bleed hydraulic system (page 3-72).
Check for hydraulic leaks and correct
Service hydraulic reservoir as needed
as necessary.
(LO 5-5420-202-12).
End of Task
TA251682
4-31


Back to Top