TM-5-5420-228-24

LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL

AUGUST 1985

TM-5-5420-228-24 - Page 616 of 750

TM 5-5420-228-24

CLUTCH CONTROLS

REPLACEMENT (Sheet 1 of 2)

TOOLS:

3/4 in. socket with 1/2 in. drive

9/16 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

SUPPLIES:

Lockwashers (3 required)

PRELIMINARY PROCEDURE:

Remove clutch assembly (page 4-33)

REMOVAL:

1.

Using 3/4 inch socket, remove screw (A) and

lockwasher (B) from lever (C). Throw lock-

2.

washer (B) away.

Pull lever (C) off shaft (D).

3.

Remove key (E).

4.

Using 9/16 inch socket, remove two screws

(F) and lockwashers (G) from yoke (H).

Throw lockwashers (G) away.

5.

Pull shaft (D) out of yoke (H) until two keys

(J) are exposed.

6.

Remove two keys (J).

7.

Pull shaft (D) out of support (K).

8.

Remove yoke (H) from support (K).

Go on to Sheet 2

4-27