TM-5-5420-228-24
LAUNCHER HYDRAULICS SYSTEM M48A5/M60A1 TANK CHASSIS, TRANSPORTING: FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL
AUGUST 1985
TM-5-5420-228-24 - Page 95 of 750
2-58.4
Change 3
TM 5-5420-228-24
STE/ICE Test Procedures - Continued
First Technician (Operator's Station)
x
Start engine.
x
Move ball valve to “LAUNCH” position.
x
Set engine speed at 1800 rpm.
x
Press and hold TEST BUTTON until readout
displays "CAL", then release button.
x
Release tongue cylinder control lever.
x
Check if pressure indication on VTM display is
between 3550 to 3650 psi.
Check tongue dual counterbalance valve for
pressure setting between 3550 to 3650 psi.
Does VTM display indicate between 3550 to 3650
psi?
8
FROM STEP 4
x
Remove transducer.
x
Replace tongue dual
counterbalance valve (page
3- 204.8).
x
Replace cartridge (C1) in
tongue dual counterbalance
valve (page 3-204.64).
10
YES
NO
9
Back to Top
