TM-55-2350-224-14
M113 FAMILY OF VEHICLES (M113A2, M113A3, M106A2, M125A2, M548A1, M577A2, M667, M730A2, M741A1, M901A1, M981, M1015A1, M1059, M1064, AND M1068)
TRANSPORT GUIDANCE
TM-55-2350-224-14 - Page 38 of 57
To develop full cable loop working
strength, cable clamp nuts must be
torqued to at least: 65 ft-lb on 1/2-in. clamp
nuts. 95 ft-lb on 5/8-in. clamp nuts.
To ensure proper torque, apply torque in
stages to both nuts alternately.
TM 55-2350-224-14
Use a staggered nailing pattern when
lumber or laminated lumber is nailed to
the floor of a railcar. Adjust the nail
pattern so that a nail going through a
piece of lumber on the top of the stack is
not driven into or against a nail in a
lower piece of lumber.
3-7
Back to Top
