TM-9-1290-262-24-P
AIMING CIRCLE, M2A2, W/E
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT,AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 1994
TM-9-1290-262-24-P - Page 45 of 192
20 If damaged, remove instruction plate (67).
21 Remove two screws (66), two Iockwashers
(69), and identification plate (70).
CLEANING
CAUTION
Do not dip the aiming circle body
assembly in cleaning compound.
1 Clean all machined metal parts with
cleaning compound (item 5, appx D).
2 Clean all optical surfaces with alcohol
(item 2, appx D) or optical cleaning
compound (item 4, appx D).
REPAIR
Repair is by replacement of authorized pads as
required. Refer to appendix C.
REASSEMBLY
1 Install identification plate (1), two new
Iockwashers (2) and two screws
(3) on body assembly (4).
ARMY TM 9-1290-262-24&P
MARINE CORPS TM 00476C-24&P
AIR FORCE TO 49A7-3-72/74
2 If removed, install new instruction plate (5)
on body assembly (4).
3-17
Back to Top
