TM-9-1290-262-24-P
AIMING CIRCLE, M2A2, W/E
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT,AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 1994
TM-9-1290-262-24-P - Page 58 of 192
ARMY TM 9-1290-262-24&P
MARINE CORPS TM 00476C-24&P
AIR FORCE TO 49A7-3-72/74
3-4. AIMING CIRCLE
REASSEMBLY (cont)
7
8
9
10
11
12
13
14
Insert sleeve spacer
spring (11).
Place torsion helical
PLATE BASE—MAINTENANCE INSTRUCTIONS. (cont)
(10) in torsion helical
spring (11) in position
in cover (12) hinge hole as shown.
Position the cover group on the base plate
(8) and aline the holes for the setscrew (9).
Push setscrew (9) in until only the threads
show.
Apply sealing compound (item 8, appx D)
to setscrew threads.
Screw in setscrew (9) and tighten securely.
Apply synthetic rubber adhesive (item 1,
appx D) to new gasket (13) and its base
plate mating surface.
Allow adhesive to dry until tacky, then
position and press new gasket (13) firmly
in place.
3-5. M24 AIMING CIRCLE TRIPOD AND COVER ASSEMBLY--MAINTENANCE
INSTRUCTIONS.
This task covers:
a.
Disassembly
c. Repair
b.
Cleaning
d. Reassembly
INITIAL SETUP
Tools and Special Tools
Electronic system maintenance tool kit (SC 5180-95-CL-B29)
Materials/Parts
Sealing compound (item 8, appx D)
Tubular rivet (MS16535-162)
References
TM 9-254
3-30
Back to Top
