TM-9-1290-262-24-P
AIMING CIRCLE, M2A2, W/E
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT,AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 1994
TM-9-1290-262-24-P - Page 63 of 192
ARMY TM 9-1290-262-24&P
MARINE CORPS TM 00476C-24&P
AIR FORCE TO 49A7-3-72/74
DISASSEMBLY
1 Using adjustable face spanner wrench, unscrew and remove two catches (1).
2 Remove eight solid rivets (2) and two cover latch assemblies (3).
3 Remove four metallic washers (4), four metallic eyelets (5), and webbing strap (6) from two
cover latch assemblies (3).
4 If damaged, remove decal (7).
CLEANING
Clean all parts per TM 9-254.
REPAIR
1 If cover is broken or damaged, repair is by replacement of next higher assembly.
2 Repair is by replacement of authorized parts as required. Refer to appendix C.
REASSEMBLY
1
2
3
4
5
6
7
Fold webbing strap (6) over two cover latch assemblies (3) and aline rivet holes.
Install four new metallic eyelets (5) and four new metallic washers (4).
Position two cover latch assemblies (3) on cover (8) and aline rivet holes.
Install eight new solid rivets (2).
Spot sealing compound (item 8, appx D) in two places on threads of each cover latch assembly
(3).
Using adjustable face spanner wrench, install two catches (1).
If decal (7) has been removed, peel backing paper off new decal, and position inside cover (8).
Press firmly in place.
3-35
Back to Top
