TM-9-1290-365-24-P
PALADIN MUZZLE VELOCITY SYSTEM M93 UPGRADED
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
OCTOBER 2000
TM-9-1290-365-24-P - Page 180 of 334
ARMY TM 9-1290-365-24&P
Do not point the radiating surface towards any personnel. Do not bring eyes to
close contact with the radiating surface. Use absorbing materials in front of the
radiating surface whenever possible.
WARNING
CAUTION
This equipment contains assemblies subject to damage by electrostatic discharge.
Use approved grounding procedures before touching, removing or inserting
printed wiring assemblies.
CAUTION
Exercise extra caution while handling the transceiver and its electrical terminal.
Use grounding strap on both hands.
c.
Do not assemble transceiver assembly or covers for at least 24 hours after applying RTV
adhesive to internal elements or transceiver assembly gasket.
d.
Use torque wrench 2098-0275-54 (mfr M/A COM) when handling the RF cable WA6706563-0 for
final tightening. Do not over torque.
e.
Tag and identify wires before disconnecting.
f.
Use only SN63WRMAP3 tin/lead solder.
Insulation compound must not be applied to any connector pins. Inadvertent
application of compound to connector pins may require replacement of connector.
g.
Apply uniform coating MIL-I-46058 TYPE 1B31 insulation compound after soldering of wires.
h.
Bond boots to D-type connectors and cables using Raychem S1125 adhesive. Apply heat for
curing using heat gun.
i.
Apply primer MIL-S-22473 grade T and sealing compound MIL-S-22473 grade CV to threads.
j.
Verify that screws are fully secured with lockwashers before final assembly. Also, verify that the
transceiver is clean from any residues of solder or foreign objects.
D.4.5 Transceiver Assembly Configurations.
D.4.5.1 CONFIGURATIONS. The M93 transceiver assembly exists in three operational configurations.
Table D-4 provides the cross reference to the respective M93 MVS transceiver assembly configurations.
Table D-4. M93 Transceiver Assembly Configurations
M93 MVS
Transceiver
Assembly
MVP CCA
EMI Filter
Module
Integrated
Simulation
Assembly
Microstrip
Antenna
Antenna
Cover
AY6707292-3
AY6707288-3
AY6707289-1
NONE
EA67061 48-0
AM6707834-0
AY6707292-4
AY6707288-4
AY6707289-1
AY6701 0553
EA67061 48-0
AM6707834-0
AY6707292-5
AY67010314
AY6707289-3
AY6701 0553
EA67061 48-1
AM67010650
CAUTION
D-10
Change 1
Back to Top
