ARMY TM 9-1290-365-24&P
Date:
__________________
Tested by:
__________________
Inspected by: __________________
D.4.13 Troubleshooting.
This paragraph contains the troubleshooting procedures for UUT failures
detected during testing. It is arranged in the sequence of test steps, and provides information on addi-
tional test steps required for the malfunction isolation. Refer to Figure FO-1 for the interconnection dia-
gram of the UUT.
WARNING
Do not point the radiating surface towards any personnel. Do not bring eyes to
close contact with the radiating surface. Use absorbing materials in front of the
radiating surface whenever possible.
CAUTION
This equipment contains assemblies subject to damage by electrostatic discharge.
Use approved grounding procedures before touching, removing or inserting
printed wiring assemblies.
D-45