TM-9-2320-209-10-1
2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL
SEPTEMBER 1980
TM-9-2320-209-10-1 - Page 424 of 549
TM 9-2320-209-10-1
1.
Place truck so that derrick sheave (1) is almost touching pole (2).
2.
Operate rear winch (3) to let out some slack in winch cable (4). (Refer to
para 4-15d.)
3.
Tie winch cable (4) to pole (2) about 2 feet above the balance point.
4.
Place outriggers (5) in position on ground. (Refer to para 4-15b.)
GO TO FRAME 3
4-370
Back to Top
