TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

TM-9-2320-209-10-1 - Page 419 of 549

TM 9-2320-209-10-1

k.

Setting Poles.

TOOLS:

Pike, pole, wood, 12 ft long

Spoon, hand, telegraph, 8 ft long, size 2

Tamp, backfill, 8 ft long, type III

Bar, digging and tamping, 8 ft long

Tagline

PERSONNEL: Two

FRAME 1

WARNING

Check derrick tube (1) carefully for damage before using.

A tube bend or flat spot can cause collapse under load. If

tube is damaged tell organizational maintenance.

When using derrick tube to lift loads. do not exceed pulling

capacities given on caution plate (2), mounted on derrick

tube.

1.

Place the truck so that the derrick sheave (3) will be in position above hole (4) when

derrick is placed for lifting.

2.

Place outriggers (5) in position on ground. (Refer to para 4-15b.)

GO TO FRAME 2

CHANGE 1

4-365