TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

TM-9-2320-209-10-1 - Page 413 of 549

TM 9-2320-209-10-1

1.

Pull feed control lever (1) and drive control lever (2) back and place latch (3) in

locked position.

2.

Place power leveler shifting handle (4) in down position.

3.

Place latch (3) in unlocked position.

4.

Keep feed control lever (1) in NEUTRAL position.

5.

Place drive control lever (2) in forward position to lower derrick (5) into cradle

(6) on cab protector (7).

NOTE

Before locking latch (3) against boring machine feed

control lever (1) and drive control lever (2), let machine

run with both levers in NEUTRAL position. This will

let heat escape from brake assemblies in clutch case.

6.

Pull both feed control lever (1) and drive control lever (2) to the rear and lock

in place with locking latch (3).

GO TO FRAME 9

4-359