TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

TM-9-2320-209-10-1 - Page 406 of 549

TM 9-2320-209-10-1

i.

Preparing Boring Machine for Travel.

TOOLS: Pliers

FRAME 1

1. Set engine to idle speed.

2.

Move truck away from hole.

3.

Place feed control lever (1) in NEUTRAL, drive control lever (2) forward

(position 3, table 4-3).

4.

Lower auger (3) until it is resting on top of level ground.

GO TO FRAME 2

4-352