TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

TM-9-2320-209-10-1 - Page 399 of 549

TM 9-2320-209-10-1

FRAME 8

1.

After hole is dug, place feed control (1) forward and drive control (2) back as shown

in position 5, table 4-3.

2.

Raise auger (3) as far as possible without pressing down bumper springs (4).

3.

Pull back on both feed control (1) and drive control (2) as shown in position 7,

table 4-3.

4.

Place locking latch (5) in lock position.

GO TO FRAME 9

4-345