TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

TM-9-2320-209-10-1 - Page 397 of 549

TM 9-2320-209-10-1

1.

If auger (1) accidently becomes overloaded:

(a) Step on clutch pedal (2) and pressit all the way down.

(b) Place FRONT TRANSMISSION gearshift lever (3) in R position.

(c) Let clutch pedal (2) up.

(d) Pull feed control lever (4) back and push drive control lever (5) forward

(position 2 table 4-3).

Auger (1) will back out of the hole.

GO TO FRAME 7

4-343