TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

  TM-9-2320-209-10-1 - Page 388 of 549

TM 9-2320-209-10-1
FRAME 4
1.
Raise derrick (1) past straight up and down position so winch cable (2) will clear
boring case (3) when derrick is moved left.
2.
Operate rear winch, lower auger (4) to about one foot off ground.
3.
Move derrick (1) left until derrick and winch cable (2) are in line.
4.
Operate rear winch to lower auger (4) to ground.
5.
If seat (5) was taken off, put seat back:
(a) Place seat mounting tube (6) on seat mounting bracket (7) and aline holes.
(b) Place retaining pin (8) through holes and lock with safety pin (9).
GO TO FRAME 5
4-334


Back to Top