TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

TM-9-2320-209-10-1 - Page 379 of 549

TM 9-2320-209-10-1

FRAME 4

1.

2.

3.

4.

5.

6.

Turn locking bar (1) and place transfer POWER TAKEOFF LEVER (2) to rear to

ENGAGE (on) position.

Move rear winch control lever (3) forward to on position.

Place power divider control lever (4) in REAR WINCH FWD position to wind in

the load.

Place power divider control lever (4) in REAR WINCH REV position to lower

load or unwind winch cable.

Place FRONT TRANSMISSION gearshift lever (5) in position 2.

Let clutch pedal (6) up slowly and press down on accelerator pedal (7). Press

down just enough to operate

winch

without racing or stalling engine.

GO TO FRAME 5

4-235