TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

TM-9-2320-209-10-1 - Page 377 of 549

TM 9-2320-209-10-1

FRAME 2

WARNING

1.

2.

3.

When using derrick tube and rear winch together, do

not go over pulling capacity shown on CAUTION plate

mounted on derrick tube.

Examine derrick tube care-

fully for damage before using. A tube bend or flat

surface can cause collapse under load. If tube is

damaged, tell organizational maintenance.

Always leave TRANSFER CASE gearshift lever (1) in

neutral position during winch operations to avoid

movement of truck.

Press clutch pedal (2) all the way in.

Place FRONT TRANSMISSION gearshift lever (3) in N position.

Place TRANSFER CASE gearshift lever (1) in neutral position.

GO TO FRAME 3

4-323