TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

TM-9-2320-209-10-1 - Page 370 of 549

TM 9-2320-209-10-1

FRAME 2

WARNING

Whenever you leave the operator’s area lock the

feed and drive control levers in brake position.

This will prevent movement of the boring machine

and possible injury to personnel or damage to

equipment. Refer to frame (8) for locking procedures.

1. To unlock feed and drive control levers (1 and 2):

(a) Pull and hold feed and drive control

levers (1 and 2) toward operator.

(b) Lift locking latch (3) by hand and turn it away from operator.

(c) Let go of levers (1 and 2).

GO TO FRAME 3

4-316