TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

TM-9-2320-209-10-1 - Page 378 of 549

TM 9-2320-209-10-1

FRAME 3

WARNING

1.

2.

3.

Always wear leather gloves when handling winch cable

to prevent injury from brakes or loose wires. Do not

let cable slide through hands. Do not let personnel

stand near winch cable during winch operation. A

snapped cable can cause series injury. Do not go over

load limits shown on winch load chart on cab door to

prevent shearing of winch shear pin.

Pull rear winch cable (1) out by hand.

Rig cable (1) on sheaves (2) as needed. (Refer to para 4-15j.)

Raise derrick tube (3) if needed. (Refer to para 4- 15c.)

GO TO FRAME 4

4-324