TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

TM-9-2320-209-10-1 - Page 374 of 549

TM 9-2320-209-10-1

FRAME 6

NOTE

Always level boring machine with engine operating at

idle speed. Leveling adjustments are easier to make

at idle speed.

1.

To level boring machine:

(a) Move derrick (1) so that leveling bubble (2) is near center. Refer to

frames 3, 4, and 5.

(b) Using ratchet wrench, turn-front-to-back leveling adjustment (3) and

side-to-side leveling adjustment (4) to center leveling bubble (2).

(c) When leveling bubble (2) is centered in circle pull out power leveler

shifting handle (5). Set handle in neutral position.

GO TO FRAME 7

4-320