TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

TM-9-2320-209-10-1 - Page 383 of 549

TM 9-2320-209-10-1

e.

Installing 9-inch, 12-inch, and 16-inch Augers.

(1) Lifting auger from stowed position.

FRAME 1

WARNING

To avoid injury to personnel and damage to equipment, do not

try to lift the 20-inch and 30-inch augers from their holders by

hand.

These augers should be lifted with the rear winch and

boring machine integral derrick.

1.

Pick the size auger (1) to be installed on rack bar (2).

2.

Lift holder locking handle (3) out of bracket (4) and holder (5).

3.

Pull auger to holder pin (6) out of auger (1) and holder (5).

4.

Lift auger (1) out of stowed position.

GO TO FRAME 2

4-329