TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

TM-9-2320-209-10-1 - Page 390 of 549

TM 9-2320-209-10-1

(2) Installing 20-inch or 30-inch auger onto rack bar.

FRAME 6

1.

Place the derrick (1) in 45° position. (Refer to para 4-15c.)

2.

Align the rack bar (2) with the auger (3).

3.

Put rubber bumper (4) and spring (5) onto rack bar (2).

4.

Move feed control lever (6) forward to lower rack bar (2) into auger (3).

5.

Make auger (3) fast with pin (7) and cotter pin (8).

6.

Stop engine. (Refer to para 4-6e.)

4-336