TM-9-2320-209-10-1

2 1/2-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; OPERATION, INSTALLATION AND REFERENCE DATA; OPERATOR LEVEL

SEPTEMBER 1980

TM-9-2320-209-10-1 - Page 394 of 549

TM 9-2320-209-10-1

FRAME 3

CAUTION

Do not use position 2 table 4-3 for boring. It will overload

equipment and can cause serious damage.

1. Push drive control lever (1) forward while pulling back on feed control lever (2)

(position 2, table 4-3).

2.

Let auger (3) come down to ground.

NOTE

Inexperienced operators should hold feed control (2) in

NEUTRAL while pushing drive control (1) forward

(position 3, table 4-3).

GO TO FRAME 4

4-340